CCNA 200 301 IP Connectivity

Question : 31 of 83

Marks: +1, -0

Refer to the exhibit. What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24?

R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0
R1(config)#interface ethernet0/0.20R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0
R1(config)#interface ethernet0/0.20 R1(config)#ip address 10.20.20.1 255.255.255.0
R1(config)#interface ethernet0/0 R1(config)#ip address 10.20.20.1 255.255.255.0

Go to Question:

Prev Question

Next Question